Replaces

1998-2002 Mercury Grand Marquis Tail Light (3 Bulb Socket) Passenger Side

Part Details

  • Location: Passenger Side

This part replaces:

  • HOLLANDER 166-1767AR
  • OE # F8MZ 13404 AA
  • PARTSLINK FO2801155

  • New

This replacement Tail light is just what you need to get your Mercury Grand Marquis in good looking form again!

Specifications:

  • RH (Passenger Side)
  • Replaces dealer part numbers: XW3Z-13404-AA, XW3Z13404AA
  • Direct bolt on
  • Direct replacement
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved
  • Bulbs and wiring not included
  • Center chrome molding included
  • 3 Bulb Light
    • Not correct for models with 4-bulb taillight housings

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This Mercury Grand Marquis Tail light makes a great replacement and has substantial cost savings over a dealer unit.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. Removing the Taillight (0:33 in the video)
    • Pull up the panel at the trunk opening.
    • Remove the thumb screw.
    • Pull back the trim.
    • Remove the three 11mm nuts on the back of the taillight.
    • Disconnect the connector.
    • Pull the taillight out and off.
  2. Changing a Bulb (1:59 in the video)
    • Twist the socket out.
    • Pull the bulb straight out.
    • Push a new bulb in.
    • Twist the socket in.
  3. Replacing the Taillight (2:11 in the video)
    • Remove the sockets from the old taillight.
    • Twist the sockets into the new taillight assembly.
    • Feed the harness through the car.
    • Line up the taillight and press it into place.
    • Reconnect the connector.
    • Replace the nuts.
    • Replace the trim.
    • Replace the thumb screws.
    • Push the trunk panel back into place.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 11mm Socket

How-to Video:

(04:35 min)

Tools List:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 11mm Socket



This part replaces:

  • HOLLANDER 166-1767AR
  • OE # F8MZ 13404 AA
  • PARTSLINK FO2801155

Vehicle Fit

  • 1998-2002 Mercury Grand Marquis Tail Light (3 Bulb Socket) Passenger Side
$70.45
Part #: 1ALTL00121

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est