Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Part Details
Handle is the original color shade.
Pro Tip: Replace Handles in pairs or sets. Fading from the sun or age can make your Vehicle Handles and Bezels appear a hue difference next to new Handles.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
This video is brought to you by 1AAuto.com your source for quality replacement parts and the best service on the internet.
In this video, we will show you how to replace an inside door handle on this 1998 Toyota Corolla. Same as any 1998 to 2002. The only tools you'll need are a Phillips screwdriver and possibly a flat-blade screwdriver.
Inside door handle replacement pretty easy. You'll see there's a Phillips screw right in the door handle. Remove that screw. Then the handle slides forward and pulls out. Behind the handle, you'll see there's a clip on a rod. Reach in with your finger and pull that clip back off. You may need a screwdriver. Push up and the handle's off.
This is my original handle. This is a new handle from 1A Auto. You can see it's all the same, the clip and everything. Put your flash rod here, put the handle in. Walk the rod down in there. To lock the clip, you pull up, and pull the handle back. This is more firm than the old one. Get it in place and tap to secure.
We hope this helps you out. Brought to you by www.1AAuto.com your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free at 888-844-3393. We're the company that's here for you on the internet and in person.
