1998-2002 Chevy Prizm Exterior Door Handle Textured Front Pair1ADHS00043
These replacement exterior door handles are just what you need to get your Toyota Corolla / Prizm in good looking form again!
- Comes as a Pair
- Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
- Injected molded plastic with black textured finish
- Durable construction
- Steel center rods and return springs
- Direct replacements for original handles
These exterior door handles are direct bolt on auto parts built to strict quality control standards. They are a great replacement and have substantial cost savings over dealer units.
Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.
Step 1: Removing the Inside Door Panel
- Remove the Phillips screw from the inside door handle.
- Slide the handle forward and pull it out.
- Disconnect the clip on the back from the rod using a flat blade screwdriver.
- Pry up the switch panel and pull it forward. Disconnect the lead.
- Pry up the armrest pad and remove the screws from underneath it.
- Turn the Phillips head until it pops out.
- Remove the panel by the mirror.
- Remove the side panel.
- Remove the water shield.
Step 2: Removing the Exterior Handle
- From the inside of the door remove the upper yellow clip attached to the handle.
- Use a flat blade screw driver through the smaller hole and push the rod out of the handle.
- Remove the lower yellow clip. And pull the rod out.
- Remove the upper 10 mm bolt from the inside of the handle. Then the one below it.
- From the outside lift the door handle up and pull it free.
Step 3: Installing the New Handle.
- Remove the locking mechanism from the old handle and attach it to the new handle.
- While inserting the handle into the door reconnect the lower rod and clip.
- Replace the 10 mm bolts.
- Reattach the upper rod and clip and flip the clip down.
- Line up and reinstall the door panel.
- Reinsert all of the screws and panels.
- Insert the Phillips head clip.
How-to Video:(10:12 min)
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- 10mm Socket
Ratchets & Related
Screwdrivers & Related
Sockets - Metric
- 1998-2002 Chevy Prizm Exterior Door Handle Textured Front Pair
- 1998-2002 Toyota Corolla Exterior Door Handle Textured Front Pair
Part #: 1ADHS00043
- Ships Same Day for orders placed by 5 P.M. ET
Free GROUND SHIPPINGCheck Shipping Rates
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."- Dwuan M.