Replaces

1998-2002 Chevy Camaro Front Brake Pad & Rotor Kit Semi-Metallic

  • New

Hearing squeaking noises from the wheels? This may be the wear tabs on the brake shoes saying, "it is time for replacement." Aging brakes can also result in a pulsation from the brake pedal or long stopping distances. Brakes should be inspected every 10,000 miles or any time the tires are removed. They may need frequent replacement such as every 20,000 miles if used in stop and go traffic. Brakes can last longer if the vehicle is used primarily for long highway trips.

Specifications:

  • Includes 2 front rotors & a front brake pad set
  • Fits Driver & Passenger Side Front
  • Rotors with 5 lug holes
  • Semi-Metallic brake pads
  • Direct replacements

This front brake pad & rotor kit makes a great replacement and has an excellent value over the price of dealer brake pads & rotors.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. Step 1: Removing the Brake Caliper (1:12)
    • Pry center cap or hubcap to access and remove the lug nuts.
    • Jack up the car and remove the wheel.
    • Place a screw driver or pry bar into the hole on the caliper and pry out so that the piston drops into the caliper.
    • Undo the two 15 mm bolts on the back of the caliper.
    • Pull caliper off, using a screw driver to pry it off if necessary.
    • Secure caliper bracket safely to avoid stressing the brake line.
  2. Step 2: Removing the Caliper Bracket and rotor (3:08)
    • Pry brake pads out of the caliper bracket.
    • Remove the two 15 mm bolts on the back side of the caliper bracket (use pipe with the ratchet for more leverage).
    • Remove bracket and rotor.
  3. Step 3: Reinstallation of Brake Caliper (4:17)
    • Replace rotor and secure with a lug nut.
    • Replace the caliper bracket and tighten bolts to 90ft/lbs.
    • Remove caliper bracket slides and clean with a wire brush.
    • Slide brake pads into place.
    • Pull caliper down and use a c-clamp to push the piston all the way into the caliper.
    • Place the caliper back on to the bracket.
    • Clean caliper bolts and add small amount of oil.
    • Replace caliper bolts. Torque them to 50ft/lbs.
    • Remove lug nut and replace wheel.
    • Tighten lug nuts in a star pattern and replace cap.
    • Before driving, pump brakes until pedal goes solid.

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Wire Brush

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket


How-to Video:

(09:13 min)

Tools List:

    General Tools

  • Large C-Clamp
  • Wire Brush

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket




Vehicle Fit

  • 1998-2002 Chevy Camaro Front Brake Pad & Rotor Kit Semi-Metallic
  • 1998-2002 Pontiac Firebird Front Brake Pad & Rotor Kit Semi-Metallic
$75.45
Save 54%
List: $164.95 Save: $89.50
Part #: 1ABFS00025

Out of Stock

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est