Replaces

1998-2002 Ford Crown Victoria Front Brake Pads Ceramic

Part Details

  • Front / Rear Location: Front
  • Brake Pad Friction Material: Ceramic

  • New

This front brake pad set is just what you need to get your vehicle stopping in good order again!

Specifications:

  • 4 Piece FRONT Brake Pad Set
  • Includes shims
  • Direct replacement
  • Professional Grade Ceramic Enhanced Disc Brake Pads

This brake pad set makes a great replacement and has an excellent value over the price of dealer brake pads.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. Remove the wheel (1:04)
    • Pry off the center cap
    • Use the hub cap key to remove the hub cap.
    • Loosen the lug nuts.
    • Raise and secure the vehicle
    • Remove the lug nuts and the wheel.
    • For extra security, put the wheel under your car should your jack stands fail.
  2. disassemble the brakes (1:45)
    • Remove the 13 mm caliper bolts.
    • Use a screwdriver to pry between the caliper and caliper bracket to pry the caliper up and off.
    • Secure the caliper with wire ties up out of the way.
    • Using an 18 mm socket and a breaker bar or pipe for leverage, remove the caliper bracket bolts.
    • Remove the brake disc.
  3. Un-install the hub (3:56)
    • Remove the dust cover from the hub nut.
    • Using a breaker bar, maybe even a pipe for leverage in addition, remove the 35 mm hub nut.
    • Remove the hub.
  4. Install the new hub (4:48)
    • Clean up the area to insure a smooth fit.
    • Put the hub on, and replace the hub nut and torque it to 220 ft lbs.
  5. Reassemble the brakes (5:55)
    • Put the brake rotor/disc back on the hub.
    • Examine the brake rotor/disc for gouges or signs of excessive wear.
    • Replace the rotor if needed, remember to clean the rotor with warm soapy water or brake cleaner before installation, and prevent contact with oil and grease.
    • Check the condition of the brake pistons; make sure they slide in and out smoothly and freely.
    • Mount the caliper brackets and torque the 18 mm bolts to 90 ft lbs.
    • Check the condition of your brake pads and install new ones if needed.
    • Slide the brake pads into the brackets.
    • Compress the caliper and slide it onto the bracket and pads.
    • Bolt the caliper in, and torque the 13 mm bolts to 15-16 ft lbs.
  6. Replace the wheel (8:30)
    • Reinstall the small center cap and hub cap keeper.
    • Replace the lug nuts and lower the car, torque them in a star pattern to 100 ft lbs.
    • Put the hub cap back on and replace the safety nut and the final center cap back in place.
    • Place your hub cap key in back in your glove box for safekeeping.
    • Make sure you pump your brakes a few times before road testing to recompress the calipers.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Wire Brush
  • Chisel
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Wire Ties
  • Anti-Seize Grease
  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 35mm Socket
  • 13mm Socket
  • 21mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(09:45 min)

Tools List:

    General Tools

  • Floor Jack
  • Wire Brush
  • Chisel
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Wire Ties
  • Anti-Seize Grease
  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 35mm Socket
  • 13mm Socket
  • 21mm Socket




Vehicle Fit

  • 1998-2002 Ford Crown Victoria Front Brake Pads Ceramic
  • 1998-2002 Lincoln Town Car Front Brake Pads Ceramic
  • 1998-2002 Mercury Grand Marquis Front Brake Pads Ceramic
$34.95
Part #: 1ABPS00371

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est