1998-01 Nissan Altima L4 2.4L Automatic Transmission 4 Piece Engine & Transmission Mount Kit TRQ MTA32811

right parts for the car.fast shipping & low cost compared to others.

Shape of material in front and rear engine mounts was different than stock, but they fit perfect. Installation was easier than most of the video guides I watched. I only needed to replace the front and rear engine mount, but the price on the set was good enough that I decided to replace all three engine mounts and the transmission mount. Easy job with basic hand tools, car ramps and a floor jack. Next time I plan to reinforce the front and rear mounts with polyurethane before installation in hopes of extending the life of the mount.

The parts received from 1AAuto are top quality and a great fit.

Great product at a super price and fast shipping.

These mounts are of good quality, but the installation process can be a bit tricky, especially because the engine must be supported while the lower mounts are replaced on the cross-member, the heavy beam that bolts to the vehicle underneath the engine. For this, a block of wood may be used, under the oil pan, supported by a separate jack, or alternatively an engine hoist may be used, depending on your facilities. A tip is that a pry bar may be used, if you are careful not to put pressure in the wrong place, to help rotate the engine/transmission assembly, so that the cross member and mounts can be realigned during re-installation. It helps to have an assistant for this job. The driver side upper mount requires removal of the battery and air intake box, also removal of the driver's side front wheel and inner fender skirt help with accessibility during removal and re-installation. Watch out for rust, and be careful with the through-mount bolts, as they can be difficult to locate or repla