1998-2000 Toyota Corolla Corner Light Pair

Part Details

  • Quantity: Pair

This part replaces:

  • OE # 81510-02040,81520-02040
  • PARTSLINK TO2520150, TO2521150

  • New

This replacement Toyota Corolla corner parking turn signal light pair is just what you need to get your Toyota in good looking form again!


  • Comes as a Pair
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Mounts in the fender
  • Does not include bulbs or wiring

This Toyota Corolla corner parking turn signal lamp pair is a great replacement and has good cost savings over a corner light from the dealer.



Lifetime Warranty

Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  1. To replace the bulb
    • Remove two 10 mm bolts securing the fuse box to move it out of the way.
    • Reach into the engine bay behind the headlight assembly and unplug the harness.
    • Unfasten the retaining clip to unplug the bulb.
    • Plug in the new bulb and twist and push it back in.
    • Remove the battery to do the same on the other side.
  2. Remove the headlight assembly
    • Remove the six 10 mm bolts securing the bumper cover.
    • Use a flat blade screwdriver to remove the push clip on the bumper cover in the center.
    • Remove the push clips in the grill area.
    • Set the bumper cover aside.
    • Use a Phillips screwdriver to remove the screw securing the parking light.
    • Pry off the parking light.
    • Remove the bulb and set aside.
    • Remove the nut and bolt now exposed and the other two on the top and opposing side of the headlight assembly.
    • Unplug the harness from the headlight assembly and set aside.
  3. Install headlight assembly
    • Preliminarily adjust the new headlight assembly by adjusting the adjustor bolt to the same length as the old assembly.
    • Plug the harness into the new headlight assembly
    • Clip the headlight into place.
    • Use your 10mm socket and ratchet and bolt the assembly back in.
    • Use your Phillips screwdriver to re-install the parking light assembly.
    • Clip the bumper cover back on and use your 10 mm socket and ratchet to bolt the bolt by the far headlight back into place.

How-to Video:

(12:33 min)

Tools List:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

This part replaces:

  • OE # 81510-02040,81520-02040
  • PARTSLINK TO2520150, TO2521150

Vehicle Fit

  • 1998-2000 Toyota Corolla Corner Light Pair
Save 56%
List: $90.90 Save: $50.45
Part #: 1ALPP00022

- Ships Same Day for orders placed by 5 P.M. ET


Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!


hablamos Español:866-401-3393
For Orders Placed By 5pm Est