Replaces
Part Details
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20+ years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts, installed correctly. That's going to save you time and money. Thank you, and enjoy the video.
In this video, I'm going to show you headlight replacement on this 97 Cadillac Seville, same as any 97 to 99. Tools you'll need are an E8 star socket, or you could substitute a 7 mm socket. You will also need a ratchet and extension, as well as a 10 mm socket, with a ratchet and extension, and a Phillips screwdriver to adjust the lights.
First, you're going to want to take your panel and just pull up a little bit. If you're just looking to replace the bulbs it's easier to remove the whole assembly. I'm going to stop it right here. I was hoping to show you that you could just service the bulbs without removing the headlights, but what I actually found was with my big hands, I really couldn't manipulate the bulbs out of the sockets. Maybe, if you have smaller hands, you are able to do that, but what I found is it's actually easier just to remove the whole headlight assembly to get to the headlight bulbs. Removing the headlight assembly is not that difficult.
Right down there, remove this bolt. Technically, the right tool is an E8 star bit. You can actually use a 7 mm socket, something that more people have in their toolbox. You stick your finger right in here to lift it up and out. Pull the light forward, and then out. If you're just looking to change your bulbs, this one has a little thumb tab, counterclockwise. There is the bulb, right over here. Once that is out of the way, there are two bolts and two nuts to remove. There are two nuts right there, top and bottom. There is one here, and then one down here. I will use a ratchet with a large extension, a 10mm. You don't really need this long of an extension.
We are just going to speed up here as I remove those two nuts and two bolts. Now you can pull the headlight forward. Now, if you're just looking to service the bulbs, behind the headlight, you twist, and then just pull out. Then they unplug right here. These lower bulbs, the same thing, a little thumb tab right there. The thumb tab twists, remove. The bulb just pulls out, and pushes back in.
If you're looking, because you broke your assembly, what you can do is you can disconnect your entire harness assembly here. I'm going to pull out this safety tab, and then push on this tab here and disconnect it. The whole assembly comes out. The old headlight, new assembly from 1A Auto. This is a pretty low mileage car, so the headlights are still in good shape. You can still even see that the 1A Auto one is much clearer.
Now, you want to switch over your harness. It has a little clip here. Just reuse the clip, push it through. I'm going to fast-forward here. Basically, you are just swapping the harness over to the new headlight. You want to undo the clips, undo the connections to the headlights, and then remove the harnesses that go into the signals. Then, transfer it all over the same way to your new light.
Now, that light is back in place. I'm just going to speed up through putting those two nuts back on, and then the two bolts. I always start the nuts and bolts first, start all of them, and then go through and tighten them up afterwards. We will complement it as well with a new parking light from 1A Auto.
Once the new light is installed, you can use a Phillips screwdriver. This adjusts side to side. Counterclockwise points the light more to the right, on this side. There is an adjusting mechanism here. You want to have this ball in the middle. You turn this screw here; figure out which way it is. It wants to go down a little bit. The car has to be on a level surface. Comparing to the original light, right there on the line is about where it should be. Actually, the bubble, you might want to have a little further forward. Once it is in and tight, put your panel in place. Last, but certainly not least, plug that in and close the hood.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free 888-844-3393. We're the company that is here for you on the Internet and in person.
