Replaces

1996-1996 Jeep Grand Cherokee Black Grille, Header Panel & Light Set

  • New

This replacement grille kit is just what you need to get your vehicle in good looking form again!

Specifications:

  • FRONT Steering Kit includes:
    • (1) - BLACK Grille
    • (1) - Header Panel (without leveling device)
    • (2) - Headlights - LH (Driver Side) & RH (Passenger Side)
    • (2) - Side Marker Lights - LH (Driver Side) & RH (Passenger Side)
    • (2) - Park/Signal Lights - LH (Driver Side) & RH (Passenger Side)
  • Replaces dealer part numbers: 5DN46SX8, 55055119AB, 55055118AB, 56005105, 56005104, 55054996AB, 56005099AB, 56005098AB, 56005099, 56005098
  • Grille comes black
    • can be paited by buyer to match or installed as is
  • Park/Signal Lights fit models with 2 lamp sockets
    • Sockets and bulbs are not included
  • Direct replacements
  • Built to strict quality control standards

This grill kit makes a great replacement and has substantial cost savings over dealer parts.

Note:

It is necessary to reuse your original hardware, as new hardware is not included with this item.

Warranty

Please inspect this part carefully prior to installation and contact us with any questions BEFORE attempting to install it. Due to the nature of this part, our 60-day warranty covers exchanges only. Parts that have been installed, neglected, or modified in any way are not eligible for this exchange.

  1. ( in the video)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. Remove the side marker light (1:05 in the video)
    • Use your No. 2 Torx screwdriver to remove the screws securing the side marker light.
    • Pull the headlight out.
    • Unplug the harness.
    • Clean the studs the headlight assembly with a wire brush.
    • Spray with penetrating oil.
  3. Install the new headlight assembly (3:00 in the video)
    • Plug in the harness.
    • Clip the new headlight back into place.
    • Screw the side marker light assembly back into place with your No. 2 Torx screwdriver.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Specialty Tools

  • Wire Brush

  • Torx Drivers & Sockets

  • Number 2 Torx driver

How-to Video:

(05:08 min)

Tools List:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Specialty Tools

  • Wire Brush

  • Torx Drivers & Sockets

  • Number 2 Torx driver




Vehicle Fit

  • 1996 Jeep Grand Cherokee Black Grille, Header Panel & Light Set
$132.95
Save 71%
List: $456.00 Save: $323.05
Part #: 1ABGK00024

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est