Replaces

1996-1997 Honda Civic Catalytic Converter and Oxygen Sensor Set for L4 1.6L (excluding EX Models) (excluding California Emissions)

Part Details

  • Location: Set

  • New

Over time, rust and heat cycles can make removing an oxygen sensor almost impossible. Stripped threads and broken wires can result in more down time and additional trips to the parts store. Skip the headaches and get your Exhaust Manifold, Catalytic Converter, Upstream Oxygen Sensor, and Downstream Oxygen Sensor in one complete kit.

Specifications:

  • New 2 piece design with new catalytic convertor
    • 3 bolt exhaust flange
    • Heat shield included
    • Has 2 provisions for Oxygen (O2) sensors
    • Includes Gaskets and Hardware
    • Direct replacement
    • Not correct for models with California emissions
  • Upstream Oxygen Sensor
    • Replaces dealer part numbers: 36531-P07-L02, 36531P07L02, 36531-P2E-A01, 36531P2EA01, 234000-2180, 2340002180
    • Direct Fit; Correct Connector No cutting or splicing
  • Downstream Oxygen Sensor
    • Replaces dealer part numbers: 36531P5A003, 36531P5AA01, 36531P5G003, 36531PR7A01, 36531PR7A02, 36531PR7A11, 36531PR7J01, 36531PR7J02, 36531PY3003, 36532P5A003, 36532P5AA01, 36532P5G003, 36532PR7A02. 36532PR7A11, 36532PR7J01, 36532PR7J02, 36532PY3003, 36531P8EA01, 36532P2EA01, 36532P30A01, 36532P65A003, 36541PR7A51,36531 P5A 003, 36531 P5A A01, 36531 P5G 003, 36531 PR7 A01, 36531 PR7 A02, 36531 PR7 A11, 36531 PR7 J01, 36531 PR7 J02, 36531 PY3 003, 36532 P5A 003, 36532 P5A A01, 36532 P5G 003, 36532 PR 7A02. 36532 PR7 A11, 36532 PR7 J01, 36532 PR7 J02, 36532 PY3 003, 36531 P8E A01, 36532 P2E A01, 36532 P30 A01, 36532 P65A 003, 36541 PR7 A51
    • Direct Fit; Correct Connector No cutting or splicing

 

Due to state emissions regulations, we cannot ship this item to the state of California as it is not C.A.R.B ( California Air Research Board) approved for use in the state of California.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Oxygen (O2) Sensor (0:45 in the video)
    • Raise and secure the vehicle
    • Disconnect the oxygen sensor wiring harness
    • Remove the O2 sensor with an O2 sensor socket and a ratchet
    • If the O2 sensor will not come off normally, cut the wires with wire cutters and remove it with a 7/8 inch socket and ratchet
  2. Installing the New O2 Sensor (1:52 in the video)
    • Twist the new O2 sensor into place
    • Tighten the O2 sensor with an O2 sensor socket and a ratchet
    • Connect the O2 sensor wiring harness

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Wire Cutters

  • Ratchets & Related

  • Ratchet

  • Sockets - SAE

  • 7/8 Inch Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Floor Jack
  • Jack Stands
  • O2 Sensor Socket

How-to Video:

(02:47 min)

Tools List:

    Pliers, Cutters & misc Wrenches

  • Wire Cutters

  • Ratchets & Related

  • Ratchet

  • Sockets - SAE

  • 7/8 Inch Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Floor Jack
  • Jack Stands
  • O2 Sensor Socket




Vehicle Fit

  • 1996-1997 Honda Civic Catalytic Converter and Oxygen Sensor Set for L4 1.6L (excluding EX Models) (excluding California Emissions)
$225.45
Part #: 1AEEK00319

Out of Stock

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est