Replaces

1996-2000 Honda Civic 2 Door Coupe Power Door Lock Actuator Driver Side

Part Details

  • Side Location: Driver Side

This part replaces:

  • OE # 72155S00A01
  • STANDARD MOTOR PRODUCTS DLA-56

  • New

This is a power door lock actuator that mounts inside the door. It is designed to REPLACE a broken or missing unit.

Specifications:

  • Fits LH (Driver Side)
  • Replaces dealer part number: 72155-S00-A01, 72155S00A01
  • Correct electrical connection
  • Direct replacement
  • Built to strict quality control standards
  • Fits 2 Door Coupe Models only

This power door lock actuator is built to strict quality control standards. It is a great replacement and has good cost savings over a dealer unit.

Note: This electrical part is tested before it leaves our manufacturer, and is not returnable. It is eligible for exchange only.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the door panel (1:12 in the video)
    • Remove the two Phillips screws from the door pull
    • Use a flat blade screwdriver to pry out the door handle bezel.
    • Use a putty knife to carefully pry off the door panel and unclip the clips securing it.
    • Pull off the panel and unplug all the wiring
  2. Remove the door lock actuator (3:45 in the video)
    • Carefully pull aside the plastic water shield
    • Drill out the rivets securing the door lock actuator.
    • Unclip the lock rods and unplug the wiring harness
    • Transfer the mounting bracket and dust cover to the new lock actuator
  3. Install the new door lock actuator (5:40 in the video)
    • Use a couple coarse threaded bolts rather than rivets to re-install the door lock actuator
    • Plug in the wiring harness and lock rods.
    • Test your connections to make sure the doors lock and unlock properly.
  4. Re-install the door panel (7:00 in the video)
    • Put the water shield back into place.
    • Reconnect the speaker and light.
    • Thread the wiring harness back into place.
    • Clip the door panel back on.
    • Re-install the door handle bezel.
    • Plug in the control panel.
    • Bolt back in the door handle pull using your Phillips screwdriver.

Tools needed for replacement:

    Drills, Drill Bits & Related

  • 5/16 Inch Drill Bit

  • Materials, Fluids, and Supplies

  • Cloth Rags

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 4mm Socket

  • Specialty Tools

  • Door Panel Removal Tool
  • Putty Knife

How-to Video:

(10:01 min)

Tools List:

    Drills, Drill Bits & Related

  • 5/16 Inch Drill Bit

  • Materials, Fluids, and Supplies

  • Cloth Rags

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 4mm Socket

  • Specialty Tools

  • Door Panel Removal Tool
  • Putty Knife



This part replaces:

  • OE # 72155S00A01
  • STANDARD MOTOR PRODUCTS DLA-56

Vehicle Fit

  • 1996-2000 Honda Civic 2 Door Coupe Power Door Lock Actuator Driver Side
$32.95
Save 36%
List: $51.52 Save: $18.57
Part #: 1ADLA00110

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est