Replaces

1995-1999 Chevy Cavalier Front & Rear Strut & Spring Assembly (Set of 4)

Part Details

  • Location: Front
  • Location: Rear
  • Quantity: Set of 4

  • New

Designed for easier installation. These are new replacement strut and spring assemblies. We recommend after replacing struts that a alignment should be done.

Specifications:

  • Comes as a SET of 4
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT & REAR
  • Each strut includes:
    • Replacement upper mounts
    • Upper and lower spring isolators
    • Upper spring seats
    • Coil springs
    • Boot kits
  • Preassembled for easier replacement
  • Fit all models

In the past, replacing struts required specialized tools to compress, remove and transfer the spring. Our new strut and spring assemblies make this job much simpler for the do it yourself mechanic. This part comes pre-assembled. Jack up and support the vehicle with jack stands. Remove the wheel. Unbolt the top mounts and the bottom from the suspension and replace the whole unit. The large bottom bolts usually require an impact wrench and socket for removal. When reassembling, be sure to torque all nuts and bolts to their proper specifications. Do not use impact tools when reassembling.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the top of the strut (0:45 in the video)
    • Pop the trunk and secure it.
    • Pull away the carpet
    • Use your 13 mm socket and ratchet and some penetrating oil to remove the three bolts securing the top of the strut.
  2. Remove the wheel (1:21 in the video)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel.
  3. Remove the bottom of the shock (1:02 in the video)
    • Unbolt the bottom bolt securing the shock.
    • Use a breaker bar and an 18 mm socket and some penetrating oil.
    • You might need a hammer to work the bolts out once you have removed the nuts.
    • Use a pry bar to pry the spindle free from the strut
  4. Install the new strut (2:10 in the video)
    • Work the strut into place and bolt in the top 10 mm bolts
    • Torque the three 13 mm nuts to 35 ft lbs
    • Bolt in the bottom nut and 18 mm bolt and torque to 85 ft lbs.
  5. Replace the wheel (3:46 in the video)
    • Put the wheel back on and hand tighten the lug nuts
    • Lower the vehicle and torque the lug nuts to 100 ft lbs

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 10mm Socket
  • 13mm Socket
  • 18mm Socket
  • 19mm Socket

  • Specialty Tools

  • Floor Jack
  • Jack Stands

How-to Video:

(05:15 min)

Tools List:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 10mm Socket
  • 13mm Socket
  • 18mm Socket
  • 19mm Socket

  • Specialty Tools

  • Floor Jack
  • Jack Stands




Vehicle Fit

  • 1995-1999 Chevy Cavalier Front & Rear Strut & Spring Assembly (Set of 4)
  • 1995-1999 Pontiac Sunfire Front & Rear Strut & Spring Assembly (Set of 4)
$285.95
Save 56%
List: $644.95 Save: $359.00
Part #: 1ASFK00094

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est