Replaces

1995-1997 Honda Accord Ignition Coil for V6 2.7L V6 ( 6th Vin Digit 6)

This part replaces:

  • OE # 30520-P0G-A02
  • HOLLANDER 610-58436
  • STANDARD MOTOR PRODUCTS UF-200

  • New

The ignition coil is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time and cause a misfire condition. In engines like this that use a coil, if the coil goes bad, the complete assembly needs to be replaced.

This Ignition Coil features the following specifications:

  • New not remanufactured
  • Replaces dealer part numbers: 30520-P0G-A02, 30520P0GA02, 4598371
  • Built to strict quality control standards
  • Direct replacement
  • 100% factory tested
  • Fits the following Honda 6 cylinder engines as listed:
    • V6 2.7L

 

These are electrical parts and are all tested before they leave our manufacturer. This electrical item is not returnable; it is only eligible for exchange.

Lifetime Warranty

Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Distributor
    • Unplug the wire underneath the distributor from the coil and distributor.
    • Remove the two 8mm bolts.
    • Pull the cap away.
    • You want the rotor to be facing straight up. Turn the key in the ignition to spin it into place.
    • Remove the 12mm bolt to the side of the distributor.
    • Pull the distributor out and press the button on the connector to remove it.
  2. Replacing the Ignition Coil
    • Disconnect the ignition coil harness.
    • Remove the three 10mm bolts.
    • Pull the ignition coil out.
    • Put a bolt through the new ignition coil and put it down into place.
    • Replace and tighten all three 10mm bolts.
    • Plug the harness back in.
  3. Replacing the Distributor
    • Reconnect the distributor.
    • Put the distributor into place exactly the way it was.
    • Replace the 12mm bolt.
    • Replace the distributor cap.
    • Replace the 8mm bolts.
    • Replace the wire.

How-to Video:

(09:19 min)

Tools List:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 12mm Wrench
  • 8mm Wrench



This part replaces:

  • OE # 30520-P0G-A02
  • HOLLANDER 610-58436
  • STANDARD MOTOR PRODUCTS UF-200

Vehicle Fit

  • 1995-1997 Honda Accord Ignition Coil for V6 2.7L V6 ( 6th Vin Digit 6)
$40.45
Save 68%
List: $125.37 Save: $84.92
Part #: 1AECI00160

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est