Replaces

1995-1997 Honda Accord A/C Condenser Cooling Fan Assembly for V6 2.7L

This part replaces:

  • OE # 38616-P0G-A02
  • DORMAN 620-255
  • HOLLANDER 674-59379

  • New

Our aftermarket A/C condenser fan assemblies are some of the highest quality replacements on the market! This AC condenser cooling fan assembly is a complete, ready to bolt on, direct replacement part.

Specifications:

  • New, not rebuilt, electric motor
  • Geometrically designed plastic blade for optimal circulation and uniform balance
  • Shroud designed to ensure structural integrity and endurance for maximum performance
  • 100% Performance factory tested
  • Replaces original assemblies that are melted or worn out
  • Comes with proper plug(s) for trouble free installation
  • Mounts behind Air Conditioning (A/C) Condenser
  • 4 Blade fan
  • Fits models with the following Honda engines as listed:
    • V6 2.7L

Now you can buy a high quality AC Condenser cooling fan motor assembly that is built to strict quality control standards. This cooling motor assembly makes a great replacement and has substantial cost savings over a dealer fan assembly.

Lifetime Warranty

Effective June 23, 2014: This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Diagnoses
    • Turn on the car and the AC and pop the hood.
    • The AC fan should be spinning, if it’s not then check the fuse.
    • If the fuse is fine and the fan doesn’t work or the fuse keeps blowing, then it’s a sign your condenser is bad.
  2. Disconnect the battery
    • Use an 8 mm wrench to disconnect the negative battery terminal
  3. Remove the AC condenser cooling fan
    • Remove the plastic skid shield and remove the 10 mm nuts on the radiator mounts.
    • Remove the seven 10 mm bolts and a few pushpins.
    • Disconnect the AC cooling fan
    • Unbolt the four 10 mm bolts anchoring the radiator to allow for some extra room.
    • Remove the two 10 mm bolts mounting the fan to the radiator.
    • Pull the old AC cooling fan up and out.
  4. Install the new AC cooling fan
    • Put the AC cooling fan down and into place
    • Plug in the AC cooling fan to the wiring harness
    • Bolt the fan to the radiator.
    • Mount the Radiator back into its mounts and bolt in the four 10 mm bolts.
    • Replace the nut down in the radiator mounts underneath the car.
    • Bolt and clip the skid shield back in.
    • Reconnect the battery with your 8 mm wrench

How-to Video:

(08:32 min)

Tools List:

    Screwdrivers & Related

  • Flat Blade Screwdriver

  • Wrenches - Metric

  • 10mm Wrench
  • 8mm Wrench



This part replaces:

  • OE # 38616-P0G-A02
  • DORMAN 620-255
  • HOLLANDER 674-59379

Vehicle Fit

  • 1995-1997 Honda Accord A/C Condenser Cooling Fan Assembly for V6 2.7L
$77.95
Save 77%
List: $345.78 Save: $267.83
Part #: 1AACF00107

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est