Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
NOTE: It is necessary to reuse your original hardware, as new hardware is not included with this item.
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
48 States Only: Due to shipping restrictions, we can only ship this to a street address within the Contiguous U.S. (lower 48 states).
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video we're going to show you how to replace the grill on this '96 Ford Ranger, same as any '93 to '97. The tools you'll need are a Phillips screwdriver, and you may need a 7/32 inch socket with a ratchet and you'll also need a 10 mm socket with a ratchet and an extension will help.
We'll remove the grill by removing six Phillips screws: one, two, three, four, five, and six. On the grill, you just pull up at the top, up on the other side, forward and up and out.
You'll want to take the Ford emblem off your grill. On the back side you want a 10 mm socket with the ratchet and extension. What ends up happening here is this nut comes loose, but it doesn't thread off the stud. Then the two speed nuts. You can see on this one, I'm being very careful not to press it at all, and it actually ends up backing off the stud. You might find you have to . I'm actually pulling on the emblem some while I'm taking this one off. As I pull the emblem and thread the bolt off it pulls the bolt off the emblem. Here's our new grill. The emblem's going to fit on there. On the back side, put the nuts back on.
The new grill kind of has little feet down here, just like the old one should have, although they were broken off on my original. They go right down into tabs here. We'll just add a couple of these screws in. Then what we do is we loosen up this eyebrow trim, here, and then push the grill down, flip it under the trim, and bring the two pieces together. Here, you can see, on the other side, I use some pretty good force to push that eyebrow trim in and then get the grill snapped on over it, and then put the other screw on the outside of the grill. The last screw on the grill, put that in, tighten it down first, and then tighten that eyebrow trim, the top screw on that. Then put your other two screws in, and we tighten these up. You don't need to have them crazy tight, just have them nice and firm, and you should be all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
