1994-1997 Honda Accord Radiator Cooling Fan Assembly for V6 2.7L

This part replaces:

  • OE # 19015P0GA01 19020P1E003
  • HOLLANDER 674-59328B
  • DORMAN 620-249

  • New

Our aftermarket radiator fan assemblies are some of the highest quality replacements on the market! This radiator cooling fan assembly is a complete, ready to bolt on, direct replacement part.


  • New, not rebuilt, electric motors
  • Replaces dealer part numbers: 19015P0GA01, 19015-P0G-A01, 19020P1E003, 19020-P1E-003, 19030PT0003, 19030-PT0-003
  • Geometrically designed plastic blade for optimal circulation and uniform balance
  • Shroud designed to ensure structural integrity and endurance for maximum performance
  • 100% Performance factory tested
  • Replaces original assemblies that are melted or worn out
  • Comes with proper plug(s) for trouble free installation
  • Does not fit 4 Cylinder models

Now you can buy a high quality radiator cooling fan motor assembly that is built to strict quality control standards. This cooling motor assembly makes a great replacement and has substantial cost savings over a dealer fan assembly.

Lifetime Warranty

Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Diagnose the problem
    • If the AC fan doesn't turn on when the car is on and the AC is running,
    • Check the AC fan fuse.
    • If the circuit is fine, then the fan could be burnt out.
    • If the fuse keeps blowing then your fan is shorting out.
  2. Disconnect the battery
    • Use an 8 mm wrench to disconnect the negative battery terminal
  3. Remove the plastic skid plate
    • Remove the seven 10 mm bolts and the push clips.
    • To remove the push clips, pry up the center with a flat blade screwdriver and that will release the body of the pin.
  4. Remove the Radiator Fan
    • Unbolt the 10 mm bolt using your socket and ratchet anchoring the radiator fan.
    • Unclip the wiring harness connection to the radiator fan.
    • Unbolt the four bolts anchoring the radiator.
    • Remove the radiator fan, using the play in the radiator to work the fan out of the engine bay.
  5. Install the new radiator fan
    • Finesse the radiator fan down in to place
    • Plug in the fan to the wiring harness
    • Hand tighten the 10 mm bolt to the radiator.
    • Put the radiator back into place and bolt in the four bolts mounting the radiator.
    • Tighten the radiator fan bolt.
  6. Re-install the skid plate
    • Bolt in the seven 10 mm bolts
    • Replace the push clips
    • Push the clip in and press down the middle to secure the push clip.
  7. Reconnect the battery
    • Reconnect the negative battery terminal

How-to Video:

(09:21 min)

Tools List:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 8mm Wrench

This part replaces:

  • OE # 19015P0GA01 19020P1E003
  • HOLLANDER 674-59328B
  • DORMAN 620-249

Vehicle Fit

  • 1994-1997 Honda Accord Radiator Cooling Fan Assembly for V6 2.7L
Save 83%
List: $337.07 Save: $278.62
Part #: 1ARFA00250

- Ships Same Day for orders placed by 5 P.M. ET


Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!


hablamos Español:866-401-3393
For Orders Placed By 5pm Est