1992-1996 Toyota Camry Interior Door Handle Bezel Gray Driver Side1ADHI00358
This replacement inside door handle bezel or frame is just what you need to get your vehicle in good looking form again!
- Fits the LH (Driver Side) Front or Rear Door
- Gray plastic
- Direct replacement
- Built to strict quality control standards
This inside door handle bezel is a great replacement and has good cost savings over the dealer unit.
Remove the door panel
- Pry off the corner trim panel.
- Remove the bezel around your door panel by prying it up with a flat blade screwdriver.
- Use your flat blade screwdriver to take off the four covers concealing Phillips screws.
- Then remove the five Phillips screws with your screwdriver.
- Remove the two push clips on the side of the door by depressing the center of the clip and pulling the body out.
- Unclip the door panel and unplug the wiring harness.
Remove the door handle
- Remove the three 10 mm bolts.
- Unclip the lock and door latch rods.
Install the door handle
- Clip the door lock and latch rods into the handle.
- Bolt the handle down into the door with your 10 mm socket and ratchet.
Put your door panel back on.
- Check out our other videos for more detailed instructions.
How-to Video:(08:23 min)
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- 10mm Socket
- 10mm Wrench
Ratchets & Related
Screwdrivers & Related
Sockets - Metric
Wrenches - Metric
- 1992-1996 Toyota Camry Interior Door Handle Bezel Gray Driver Side
Part #: 1ADHI00358
- Ships Same Day for orders placed by 5 P.M. ET
Free GROUND SHIPPINGCheck Shipping Rates
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."- Dwuan M.