Replaces

1990-1996 Chevy Corvette Coupe Weatherstrip Seal Kit (13 Piece)

Part Details

  • Quantity: 13 Piece

  • New

This is a complete weatherstrip kit and more. All components in this kit are the highest quality reproductions.

Specifications:

  • Kit Includes:
    • (2) - Door Weatherstrips - LH (Driver Side) & RH (Passenger Side)
    • (2) - Targa Top Side Seals - LH (Driver Side) & RH (Passenger Side)
    • (1) - REAR Targa Top Seal - (Mounts to Body)
    • (1) - REAR Glass Hatch Seal
    • (1) - Windshield Header Seal
    • (2) - Fender Well Seals
    • (1) - 4 Piece Window Belt/Sweep Set
  • Direct replacement
  • Built to strict quality control standards

This weatherstrip kit makes a great replacement and has good cost savings over the dealer parts.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Disconnecting the Battery (0:48 in the video)
    • Disconnect the negative battery cable with an 8mm wrench
  2. Removing the Hatch Seal (0:55 in the video)
    • Remove the Phillips head screws from the rear hatch trim panel
    • Pull off the rear hatch trim panel
    • Loosen the Phillips screws from the remaining hatch trim panels
    • Pull off the hatch seal by hand
  3. Preparing the Hatch (2:37 in the video)
    • Clean the hatch seal channel with a shop vacuum
    • Clean the hatch seal channel with soapy water
    • Clean the hatch seal channel with mineral spirits
    • Scrape off any adhesive residue with a razor blade
  4. Installing the New Hatch Seal (3:59 in the video)
    • Unclip the hatch supports at the top
    • Have an assistant hold the hatch up
    • Position the seal
    • Push the hatch supports into place
    • Feed the hatch seal into the channel
    • Apply weatherstrip adhesive to the seal channel
    • Push the seal into the channel
    • Push the trim panels into place
    • Tighten the Phillips screws into the trim panels
    • Apply silicone lubricant to the hatch seal
    • Close the hatch
    • Keep the hatch closed to compress the seal
  5. Reconnecting the Battery (7:08 in the video)
    • Reconnect the negative battery cable with an 8mm wrench

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Cloth Rags
  • Gasket Adhesive
  • Mineral Spirits
  • Soapy Water
  • Sponge

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Specialty Tools

  • Assistant
  • Razor Blade / Gasket Scraper
  • Vacuum

How-to Video:

(07:23 min)

Tools List:

    Materials, Fluids, and Supplies

  • Cloth Rags
  • Gasket Adhesive
  • Mineral Spirits
  • Soapy Water
  • Sponge

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Specialty Tools

  • Assistant
  • Razor Blade / Gasket Scraper
  • Vacuum




Vehicle Fit

  • 1990-1996 Chevy Corvette Coupe Weatherstrip Seal Kit (13 Piece)
$501.95
Only 4 left in stock
Part #: 1AWSK00101

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est