Replaces

1982-1992 Chevy Camaro Triangle Weatherstrip Seal Pair Front

Part Details

  • Front / Rear Location: Front
  • Quantity: Pair

  • New

82-92 FIREBIRD CAMARO FRONT WINDOW TRIANGLE SEAL Pair. THIS IS THE SMALL SEAL THAT MOUNTS IN TO THE TRIANGLE AT THE FRONT OF THE DOOR. The front of the window slides up in to it when raised. When these parts dry up and wear out you will get wind noise from the front window. Stop that wind noise by replacing yours today.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Door Panel (1:30 in the video)
    • Disconnect the negative battery cable
    • Remove the three T27 screws on the door pull
    • Remove the six T10 screws on the switch panel
    • Pull the lock button back
    • Disconnect the lock wiring harness with a flat blade screwdriver
    • Remove the T10 Torx screw behind the lock button
    • Remove the mirror control
    • Remove the retaining clip from the mirror control with a flat blade screwdriver
    • Pry behind the lock with a flat blade screwdriver
    • Slide the side panel back and out
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Lift up on the door molding and remove it
    • For more detailed instructions, please see the '86 Camaro IROC-Z door panel replacement video
  2. Removing the Triangle Seal (2:44 in the video)
    • Remove the two Phillips screws holding the top of the weatherstrip
    • Peel the top of the weatherstrip back
    • Carefully peel the water shield
    • Remove the 10mm nuts from the bracket attached to the triangle seal
    • Remove the two 10mm bolts from the door
    • Lift the triangle seal out of the door
  3. Separating the Triangle Seal (5:12 in the video)
    • Warm up both sides of the triangle seal with a heat gun
    • Pull the triangle seal off with a pair of pliers
    • You can try this process to skip removal of the door panel, though it is not recommended

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 7mm Socket
  • 8mm Socket

  • Specialty Tools

  • Heat Gun
  • Putty Knife

  • Torx Drivers & Sockets

  • T10 Torx Driver
  • T27 Torx Driver

  • Wrenches - Metric

  • 10mm Wrench
  • 7mm Wrench
  • 8mm Wrench

How-to Video:

(08:19 min)

Tools List:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 7mm Socket
  • 8mm Socket

  • Specialty Tools

  • Heat Gun
  • Putty Knife

  • Torx Drivers & Sockets

  • T10 Torx Driver
  • T27 Torx Driver

  • Wrenches - Metric

  • 10mm Wrench
  • 7mm Wrench
  • 8mm Wrench




Vehicle Fit

  • 1982-1992 Chevy Camaro Triangle Weatherstrip Seal Pair Front
  • 1982-1992 Pontiac Firebird Triangle Weatherstrip Seal Pair Front
  • 1982-1992 Pontiac Trans Am Triangle Weatherstrip Seal Pair Front
$45.45
Save 44%
List: $81.70 Save: $36.25
Part #: 1AWSK00182

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est