Replaces

1982-1992 Pontiac Trans Am T-Tops Molded Headliner, Sail Panel, and Visor Set Foam Back Cloth

Part Details

  • Material: Foam Back Cloth
  • Part Type: Molded

  • New

This is a complete headliner, sunvisor, and sail panel kit. The set includes our assembled molded headliner, a pair of sunvisors, and a pair of rear sail panels with speaker cut-outs.

The headliner is molded ABS plastic backed interior headliner. This is a great reproduction which is much improved in materials over the original. The shell is made of molded ABS plastic which will not absorb moisture like the paperboard original. A nylon padding is used which lasts much longer and does not granularize. The result is a great looking product that is designed to outlast the original.

Foam Back Cloth Color Options:

  • FB1559 Black
  • FB1787 Briar Brown
  • FB1611 Carmine
  • FB1666 Claret
  • FB2001 Graphite
  • FB1755 Saddle
  • FB1714 Maple
  • FB1789 Medium Beechwood
  • FB1810 Medium Dark Grey
  • FB2092 Navy Blue
  • FB1785 Royal Blue
  • FB1833 Medium Russet
  • FB2126 Sand Gray

NOTE: This only fits models that came with factory (Fisher Body) installed T-Tops. Does not fit aftermarket T-Tops that were installed by C & C (Cars & Concepts). To determine which top style you have, remove one of the tops and measure the side that tucks into the center support section of the roof. Factory, or Fisher, tops will measure 30 1/4" while the C & C tops will only measure 28" long.

NOTE: The sail panels attach like originals. Please reuse old hardware.

NOTE: This headliner kit ships at UPS 70LB rate. The headliner is rolled up to fit into the box. You must let it retake it's shape over a 24-hour period before you install it.

Returns Note:

Headliners are custom made to order, and because of this they are non-returnable. If you are unsure of which color is correct for your specific vehicle, please contact us before purchasing and we can send physical color samples out to you.

Shipping Time: This item is custom made to order and will take 2 to 3 weeks for delivery.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Disconnecting the Battery (1:15 in the video)
    • Disconnect the negative battery cable with an 8mm wrench
  2. Removing the Rear Seat Trim (1:26 in the video)
    • Remove the two Phillips head screws from the door frame
    • Remove the two Phillips screws from the door frame trim
    • Remove the door frame trim
    • Remove the Phillips screws from the coat hangers
    • Remove the coat hangers
    • Remove the Phillips screws from the rear roof panel and sail panels
    • Remove the roof and sail panels
    • Fold down the rear seat
    • Remove the T50 Torx bolt from the side panel
  3. Removing the Trunk Trim (3:03 in the video)
    • Open the Trunk
    • Remove the three plastic plugs from the trunk with a flat blade screwdriver
    • Pull of the trunk panel
    • Remove the three Phillips screws from each sunshade bracket
    • Remove the sunshade brackets
    • Pry off the side panels with a flat blade screwdriver
  4. Removing the Headliner (4:17 in the video)
    • Remove the three Phillips head screws from each sun visor bracket
    • Pull off the sun visors
    • Remove the Phillips screws from each windshield pillar molding
    • Pull the windshield molding pieces down and off
    • Remove the two pins from the dome light with a flat blade screwdriver
    • Pull down the dome light Disconnect the dome light wiring harness
    • Pull down the seatbelt tongue
    • Carefully pull down the headliner, releasing the headliner clips as you go

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 8mm Socket

  • Torx Drivers & Sockets

  • T50 Torx Socket

How-to Video:

(07:53 min)

Tools List:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 8mm Socket

  • Torx Drivers & Sockets

  • T50 Torx Socket




Vehicle Fit

  • 1982-1992 Chevy Camaro T-Tops Molded Headliner, Sail Panel, and Visor Set Foam Back Cloth
  • 1982-1992 Pontiac Firebird T-Tops Molded Headliner, Sail Panel, and Visor Set Foam Back Cloth
  • 1982-1992 Pontiac Trans Am T-Tops Molded Headliner, Sail Panel, and Visor Set Foam Back Cloth
$320.45
Part #: 1AIHL00311

- Shipping Times Vary

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est