Replaces

1966-1966 Buick LeSabre Convertible Weatherstrip Seal Kit

  • New

This set includes the door, convertible top, and trunk seals. These seals are the most accurate reproductions on the market.

Features:

  • Molded ends exactly like the originals
  • Hardened plastic mounting pins
  • Smooth soft fine grain rubber

Note: This kit contains the header seal that has the molded ends. This type is for the late production 1966 models. Please check your style prior to ordering.

Fits 2 door convertible only.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Dry Fitting the Trunk Weatherstrip (1:00)
    • Remove the trunk adhesive
    • Remove any rust or scale
    • Insert the weatherstrip with the thicker side down in
    • Push the lip so it sits on the top of the trunk, then push the lip down in
    • Use a plastic spoon or trim tool to keep from scratching
    • Repeat this process as you fit the weatherstrip around
    • Cut a quarter inch beyond where the seam is with a razor blade to match the weatherstrip
    • Close the trunk to check the weatherstrip placement
  2. Installing the Weatherstrip (5:40)
    • Pop open the trunk
    • Loosen the striker or latch bolts and slide the striker or latch up or down to adjust the trunk
    • If the weatherstrip keeps the trunk from closing, adjust the trunk so it sits on the weatherstrip
    • After the weatherstrip has pressed down, adjust the striker or latch back in place
    • Remove the weatherstrip
    • Line the outside of the trunk channel with painter's tape
    • Place adhesive inside the line of the trunk channel near the tape
    • Place adhesive on the side of the weatherstrip that will touch down in the channel
    • Insert the weatherstrip into place
    • Repeat the process for the rest of the weatherstrip
    • Trim off any excess near the end
    • Remove the painter's tape

Tools needed for replacement:

    General Tools

  • Razor Blade / Gasket Scraper
  • Wire Brush
  • Heat Gun

  • Materials, Fluids, and Supplies

  • Painter's Tape
  • Plastic Spoon

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(12:06 min)

Tools List:

    General Tools

  • Razor Blade / Gasket Scraper
  • Wire Brush
  • Heat Gun

  • Materials, Fluids, and Supplies

  • Painter's Tape
  • Plastic Spoon




Vehicle Fit

  • 1966 Buick LeSabre Convertible Weatherstrip Seal Kit
  • 1966 Buick Wildcat Convertible Weatherstrip Seal Kit
  • 1966 Chevy Bel-Air Convertible Weatherstrip Seal Kit
  • 1966 Chevy Biscayne Convertible Weatherstrip Seal Kit
  • 1966 Chevy Caprice Convertible Weatherstrip Seal Kit
  • 1966 Chevy Impala Convertible Weatherstrip Seal Kit
  • 1966 Olds 88 Convertible Weatherstrip Seal Kit
  • 1966 Olds Jetfire Convertible Weatherstrip Seal Kit
  • 1966 Olds Jetstar 88 Convertible Weatherstrip Seal Kit
  • 1966 Pontiac Bonneville Convertible Weatherstrip Seal Kit
  • 1966 Pontiac Catalina Convertible Weatherstrip Seal Kit
  • 1966 Pontiac Executive Convertible Weatherstrip Seal Kit
  • 1966 Pontiac Parisienne Convertible Weatherstrip Seal Kit
$ 258.95
Save 28%
List: $357.95 Save: $99.00
Only 1 left in stock
Part #: 1AWSK00308

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY M-F
For Orders Placed By 5pm Est